Introduction
Due to its versatility and effective performance, the Sig P320 is popular with many firearms users. However, any machine has its share of problems. If you are a veteran Sig P320 owner or a newcomer in the world of guns and pistol shooting, it is always important to know what to expect in order to avoid frustrations later.
In this post, we are going to take a look at 4 major Sig P320 problems and discuss their solutions to avoid frustrations. Therefore, let’s get started and make sure that your weapon functions properly every single time you need it!
Top 4 Sig P320 Problems & Solutions
The Sig P320 is one of the most favored handguns among shooters because of its complexity and dependability. Let’s dive deep into Sig P320 problems to perfect shooting.
- Lever Issue
- Failure to Fire(FTF)
- Failure to Extract
- Unintentional Firing
1. Lever Issue & Its Solution
One common Sig P320 problems are levers issues, that is often seen as a very reliable firearm. These problems may take shape as slide operations or safety engagement problems. This situation is mostly caused by the build-up of dirt or insufficient lubrication.
To ensure that your weapon operates effectively, regular maintenance is important. But these irritations are still possible to avoid. In case you notice that the lever is jammed or does not move smoothly, investigate both the lever and the parts adjacent to it. Make sure that such an Sig P320 problems is not preventing any movement.
It is even amazing how the simple application of a good gun lubricant on moving items can help. This helps in the easier use of the item while also increasing its lifespan. In some cases, however, some parts may have to be replaced due to age and tear.
2. Failure to Fire(FTF) & Its Solution
Failure to Fire (FTF) is a real Sig P320 problems for the owner. No fun at all! This is when one pulls the trigger and the gun does not go off. This can happen due to several reasons some of which may involve the use of the gun or the ammunition itself.
First, check the ammunition that you are using. Make sure that it is useable and appropriate for your P320. Use of old or dented ammunition can cause firing problems. Next, ensure that the slide is in a closed position. An open slide may completely stop a round from being fired. Give it an aggressive push until the slide clicks back.
Prevention is better than cure: so make sure that regular maintenance is carried out to reduce incidents of FTF. However, if these precautions do not fix the underlying Sig P320 problems, it is suggested to contact a qualified gunsmith to help determine if there are any issues with the mechanical parts of the hand gun in question.
3. Failure to Extract & Its Solution
The inability to extract shells from the chamber can be a point of annoyance Sig P320 problems. This usually happens when the spent casing fails to exit from the chamber leading to jams and misfiring.
This is mainly due to a worn out or fouled Extractor. Some more care is needed in this aspect. Constant maintenance of the weapon helps to eliminate deposits that might affect the effective working of the firearm. Another wrong can be low-quality ammunition.
Inexpensive ammo can have variation in internal pressure, hence affecting ejection. For this reason, use good quality dependable ammunition. If the Sig P320 problems persists even after cleaning the gun, and changing the ammunition, it’s advisable to inspect the extractor for signs of damage or wear out. If it looks worn out, then it is probably important to have it replaced.
4. Unintentional Firing & Its Solution
Accidentally firing off a weapon is an inevitable risk while using any firearm like Sig P320. The internal safety device or negligence during handling are examples of where the Sig P320 problems may arise.
Another source of unintentional firing problems may be the accidental pull of the triggers mechanisms by the shooter or anybody else present. It is important to make sure that when one is not shooting their finger is not in the trigger. Training and safety measure always come to play so that accidents do not happen.
If unintentional firing incidences happen more often than they should, think about reporting to the Sig Sauer customer care service. The service will know what to say and do depending on the age and production background of your device. Safety should always come first when dealing with these Sig P320 problems– better safe than sorry.
FAQs – Sig P320 Problems
Q1: How resistant is the Sig P320 to wear and tear?
The durability of a particular item largely hinges on the frequency of its use and the level of its upkeep. Provided with adequate care, it can stand the test of time with regards to usage for several years and in other cases for decades.
Q2: What are the types of ammunition that should be avoided?
Yes. It is advisable not to use any poorly made or wahtever cheap reloaded ammunition which can lead to feeding issues.
Q3: How can I check whether my P320 has the latest safety enhancements?
For this inquiry, kindly refer to your manufacturer or an authorized dealer. They will know if there are any enhancements available for your type of model.
Q4: Is periodic maintenance important for operation without failure?
Of course! Cleaning or inspection among others are maintenance practices and are important for the performance levels desired and also for the life span of the equipment.
Q5: Do you have any idea, where I could find replacement parts for my Sig P320?
Quite a few reliable online retailers offer genuine parts. You may also find the specific parts you need from nearby gun shops.
Conclusion
With the Sig P320, it is advisable that you understand the problematic issues among shooters in order to make the shooting experience safe and enjoyable. Issues such as lever down, failure to fire, issues with extraction, and accidental discharge, for example, help you troubleshoot sooner.
Maintenance is of utmost importance. Learning about these Sig P320 problems allows one to take preemptive actions that will assist in keeping the gun in an efficient working condition. These are quite often minor issues whether they are simple tweaking or major reconstructions, taking care of such issues immediately will ensure that the reliability that Sig Sauer guns provide is upheld.
One thing you need to always remember is that safety comes first in every situation where a gun is being used. It is always good to know how to solve particular Sig P320 problems as this not only keeps you safe but also better helps you in mastering the use of that particular weapon. Be vigilant and shoot without any worries!
