Introduction
Innovative design, great capacity – that is why the Kel-Tec KSG shotgun has many fans among firearm lovers. Nevertheless, it is a mechanical object, and as any other machines it can have problems of performance. Regardless of whether you are an expert and a shooter or you are just a beginner, knowing the reasons behind these issues can help you take care of your weapon.
In this article, we’ll explore the four most common Kel-Tec KSG problems and provide quick fixes so that you can get back to shooting in no time. Continue reading to learn how to take care of your shotgun so that it works flawlessly when needed the most!
Common Kel-Tec KSG Problems And Their Solution
The Kel-Tec KSG shotgun is renowned for its design ingenuity. However, just like any other firearm, there are certain challenges that one might encounter. Knowing these general Kel-Tec KSG problems could improve your overall shooting experience.
- Jamming Issue
- Loading Problem
- Problem with the Selector Switch
- Recoil Issue
1. Jamming Issue & Its Solution
A jam is one of the most annoying Kel-Tec KSG problems, thanks to its low rate of jamming. This might happen for various reasons, but it often has to do with the ammunition or clogged chamber. If you are using cheap shells, then you should consider shifting to a better brand.
High-brass shotshells tend to work better than the cheap ones. Another reason for this could be because of the action or chamber being gummed up with foreign material. A fair amount of cleaning as well as maintenance should be done frequently in order to avert this Kel-Tec KSG problems from getting worse. Develop a routine of checking your gun before every use.
Similarly, ensure that the magazine tubes are well aligned as you load the rounds to avoid misalignment of the feeding system which contributes to jams when firing. If these factors are tackled well, the number of such incidents is expected to greatly minimize, and the experience of using the KSG while shooting will be more enjoyable.
2. Loading Problem & Its Solution
One of the frequent Kel-Tec KSG problems is the issue of loading. It is rather common for users to have a hard time loading shells into the magazine tubes. This can be quite annoying given the urgency of the situation. An underlying factor is often due to the fact that the shells have not been aligned properly.
In such a scenario, it is very normal for the shells to get stuck or dislocated in the tube if the insertion is done incorrectly. To sort this out, please use the right ammunition and make sure that each shell is placed properly inside the tubular magazine before attempting to load in more.
Magazines’ tubes can also be filled up with accumulation of dirt and dust. To avoid such Kel-Tec KSG problems regular handling and clean up operations will be carried out to ensure no build up occurs that would otherwise inhibit seamless operations. In case nothing works, you can always refer to the user guide and check what troubleshooting steps can be taken for the particular serial number of your model.
3. Problem with the Selector Switch & Its Solution
The purpose of the selector switch on the Kel-Tec KSG is fundamental: it is there to allow the user to select which of the two magazine tubes they wish to use. One common Kel-Tec KSG problems that will be experienced with this switch is that it may become stiff or totally unresponsive. This is quite annoying particularly when one is on a time constraint.
Usually, dirt and other waste matter and residue in the vicinity of the switch can prevent the operation of the switch. This is where preventive maintenance comes in. Using a brush or compressed air, clean any surfaces around the switch to get rid of excess dirt.
In the event this fails, the tiebreaking option will involve several drops of user safe liquid grease recommended for use on guns. This will also help reduce the amount of gib material that gets onto the internal parts as well as preventing the components from sticking.
There can also be cases when some internal components of the switch may be breaking off. If this appears to be the situation, the services of a certified gunsmith may be required to repair or replace the affected parts in order to restore the KSG’s selector switch’s functionality.
4. Recoil Issue & Its Solution
For many owners recoil presents a fairly serious Kel-Tec KSG problems. The gun’s unique bullpup build allows for relatively punishing shots, however, this comes with the fairly unpleasant increase in knockback. Most shooters say that pain or difficulty aiming is felt when shooting bursts of fire.
To help reduce the kick, try adding a muzzle brake which is sold separately. These devices lessen the impact experienced during every shot by changing the direction of the gases. Their installation is quite simple and can seriously upgrade the quality of shooting.
This additional padding absorbs some of the shock thus making it less painful to shoot for long periods. Employ the correct stance and grip techniques. A good and stable stance will assist you in controlling recoil while keeping the firearm steady when firing at a fast rate.
FAQs – Kel-Tec KSG Problems
Q1: What is the distance a Kel-Tec KSG can shoot effectively?
The effective shooting distance of the KSG is between 50-100 yards, however depending on the conditions and type of ammo, it can vary.
Q2: What are the procedures for cleaning a Kel-Tec KSG?
You should clean any firearm starting from the muzzle. Acquire and use specific firearms cleaning supplies. More effort must be exerted in cleaning out the chamber, barrel, and magazine tubes though.
Q3: Are there any restrictions on how many types of ammunition I can use in my KSG?
Yes, you may use any number of shotgun, birdshot, buckshot or slugs included. Finish standard loads and always check if specialized or non-standard loads can be used.
Q4: Is the Kel-Tec KSG a gun that novices can use?
As it is a very dependable weapon with countless features, it is recommended for beginners to undergo some training because of its bullpup frame and recoil.
Q5: What aftermarket parts should be installed in order to improve performance?
Common improvements are tactical lights, laser sights, adjustable stocks, resolving improving recoil pads, and everything else that helps shoot better during firing sessions.
Conclusion
The Kel-Tec KSG shotgun is one of the most trusted shotguns among the enthusiasts, thanks to its unique design and functionality. However, just like any other gun, it has a share of certain common problems which might annoy some users. Nevertheless, with knowledge about these Kel-Tec KSG problems and their remedies, you can get timely support in making your KSG function normally.
These remedies to the above Kel-Tec KSG problems will also help improve the performance of your Kel-Tec KSG with time. You can be sure of their working efficiency when the time comes and even add on to the fun of using them without any worry. Understand the possible challenges and regular repair services so that you can harness more from the firearm.
